-
Flight Controller F405-WTE – Matek Systems
Flashing via WiFi
Power on F405-WTE by USB, Receiver’s LED(Red) will blink slow at first, and after 30s, it should blink fast indicating it’s on WiFi Hotspot Mode.
More detailed steps, pls refer thi...
-
GNSS & Compass, M10Q-5883 – Matek Systems
Wiring and settings
M10Q-5883 RX to Flight controller UART_TX
M10Q-5883 TX to Flight controller UART_RX
M10Q-5883 CL to Flight controller I2C_SCL
M10Q-5883 DA to Flight controller I2C_SDA
M10Q-588...
-
GNSS, SAM-M10Q – Matek Systems
Wiring and settings
GNSS RX to Flight controller UART_TX
GNSS TX to Flight controller UART_RX
GNSS G to Flight controller GND
Tips and Notes
INAV 5.0.0, Betaflight 4.3.0, ArduPilot 4.3 or newer is ...
-
Flight Controller H743-WING V2/V3 – Matek Systems
RC INPUT
The Rx6 pin, which by default is mapped to a timer input, can be used for all ArduPilot supported receiver protocols, except CRSF which requires a true UART connection. However, bi-directiona...
-
Flight Controller F405-HDTE – Matek Systems
RC7_OPTION 28 //Relay On/Off, Use CH7 of Transmitter to control Vxs ON/OFF
RELAY_PIN2 82 //Camera input switch PINIO
RC8_OPTION 34 //Relay2 On/Off, Use CH8 of Transmitter to control C...
-
Flight Controller F405-WMN – Matek Systems
RELAY_PIN 81 //PIO1 GPIO
RC7_OPTION 28 //Relay On/Off, Use CH7 of Transmitter to control PIO1 Low/High Level
RELAY_PIN2 82 //Camera switch GPIO
RC8_OPTION 34 //Relay2 On/Off,...